HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 122

attributes (DMM job configuration submode) Chapter 2 A Commands Send documentation comments to [email protected] attributes (DMM job configuration submode) To set the attributes of a data migration job, use the attributes command in DMM job configuration submode. To remove the attributes of a data migration job, use the no form of the command. attributes job_type {1 | 2} job_mode {1 | 2} job_rate {1 | 2 | 3 | 4} job_method {1|2} no attributes job_type {1 | 2} job_mode {1 | 2} job_rate {1 | 2 | 3 | 4} job_method {1|2} Syntax Description job_type {1 | 2} job_mode {1 | 2} job_rate {1 | 2 | 3 | 4} job_method {1|2} Specifies the job type. Specify 1 for a server type job and 2 for a storage type job. Specifies the job mode. Specify 1 for an online job and 2 for an offline job. Specifies the job rate. Specify 1 for the default rate, 2 for a slow rate, 3 for a medium rate, and 4 for a fast rate. Specifies the job method. Specify 1 for Method 1 and 2 for Method 2. Defaults None. Command Modes DMM job configuration submode. Command History Release 3.3(1a) Modification This command was introduced. Usage Guidelines None. Examples The following example sets the job type to storage, the job mode to online, and the job rate to fast: switch# config t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# dmm module 3 job 1 create Started New DMM Job Configuration. Do not exit sub-mode until configuration is complete and committed switch(config-dmm-job)# attributes job_type 2 job_mode 1 job_rate 4 job_method 1 switch(config-dmm-job)# Related Commands Command show dmm job show dmm srvr-vt-login Description Displays job information. Displays server VT login information. 2-30 Cisco MDS 9000 Family Command Reference OL-18089-02, Cisco MDS NX-OS Release 4.x