HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 1322

show line Chapter 22 Show Commands Send documentation comments to [email protected] show line To configure a virtual terminal line, use the show line command. show line [com1 [user-input-string] | console [connected | user-input-string]] Syntax Description com1 user-input-string console connected Displays aux line configuration. Displays the user-input initial string. Displays console line configuration. Displays the physical connection status. Defaults None. Command Modes EXEC mode. Command History Release 1.2(1) 3.0(1) Modification This command was introduced. Modified examples for Supervisor-1 and Supervisor-2 modules. Usage Guidelines None. Examples The following example displays output from an MDS switch with a Supervisor-1 module. switch# show line console line Console: Speed: 9600 bauds Databits: 8 bits per byte Stopbits: 1 bit(s) Parity: none Modem In: Enable Modem Init-String default : ATE0Q1&D2&C1S0=1\015 Statistics: tx:12842 rx:366 Register Bits:RTS|CTS|DTR|DSR|CD|RI The following example displays output from an MDS switch with a Supervisor-2 module. switch# show line console line Console: Speed: 9600 bauds Databits: 8 bits per byte Stopbits: 1 bit(s) Parity: none Modem In: Enable Modem Init-String default : ATE0Q0V1&D0&C0S0=1\015 Statistics: tx:12842 rx:366 Register Bits:RTS|CTS|DTR|DSR|CD|RI 22-254 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x