HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 63

Chapter 1 CLI Overview Navigating Through CLI Commands Send documentation comments to [email protected] You can also gather specific information on the entire switch configuration by issuing the relevant show commands. Configurations are displayed based a specified feature, interface, module, or VSAN. Available show commands for each feature are briefly described in this section and listed at the end of each chapter. Examples 1-4 to 1-10 display a few show command examples. Example 1-4 Displays Details on the Specified Interface switch# show interface fc1/1 fc1/1 is up Hardware is Fibre Channel, 20:01:ac:16:5e:4a:00:00 vsan is 1 Port mode is E Speed is 1 Gbps Beacon is turned off FCID is 0x0b0100 0 frames input, 0 bytes, 0 discards 0 runts, 0 jabber, 0 too long, 0 too short 0 input errors, 0 CRC, 0 invalid transmission words 0 address id, 0 delimiter 0 EOF abort, 0 fragmented, 0 unknown class 0 frames output, 0 bytes, 0 discards Received 0 OLS, 0 LRR, 0 NOS, 0 loop inits Transmitted 0 OLS, 0 LRR, 0 NOS, 0 loop inits Example 1-5 Displays the Software and Hardware Version switch# show version Cisco Nexus Operating System (NX-OS) Software TAC support: http://www.cisco.com/tac Copyright (c) 2002-2008, Cisco Systems, Inc. All rights reserved. The copyrights to certain works contained herein are owned by other third parties and are used and distributed under license. Some parts of this software are covered under the GNU Public License. A copy of the license is available at http://www.gnu.org/licenses/gpl.html. Software BIOS: version 1.1.0 loader: version 1.2(2) kickstart: version 4.1(1) [build 4.1(0.155)] [gdb] system: version 4.1(1) [build 4.1(0.155)] [gdb] BIOS compile time: 10/24/03 kickstart image file is: bootflash:///m9200-ek9-kickstart-mzg.4.1.0.155.bin kickstart compile time: 10/12/2020 25:00:00 [07/23/2008 10:00:56] system image file is: bootflash:///m9200-ek9-mzg.4.1.0.155.bin system compile time: 12/25/2010 12:00:00 [07/23/2008 10:53:42] Hardware cisco MDS 9216i (2 Slot) Chassis ("2x1GE IPS, 14x1/2Gbps FC/Supervisor") Intel(R) Pentium(R) III CPU with 965712 kB of memory. Processor Board ID JAB1007017G Device name: 10.64.66.22 bootflash: 1001448 kB slot0: 0 kB (expansion flash) Kernel uptime is 1 day(s), 2 hour(s), 22 minute(s), 40 second(s) Last reset at 800175 usecs after Tue Jul 29 11:07:38 2008 OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 1-17