HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 191

Chapter 4 C Commands clear fc-redirect decommission-switch Send documentation comments to [email protected] clear fc-redirect decommission-switch To remove all existing FC-Redirect configurations and disable any further FC-Redirect configurations on a switch, use the clear fc-redirect decommission-switch command. clear fc-redirect decommission-switch Syntax Description This command has no other arguments or keywords. Defaults None. Command Modes EXEC mode. Command History Release 3.2(1) Modification This command was introduced. Usage Guidelines This command is used after write erase. The command is also used to move a switch from a fabric with FC-Redirect configurations to another fabric. After using this command, disconnect the switch from the fabric and reboot the switch before using it in another fabric. Examples The following example shows how to decommission FC-Redirect on a switch: switch# clear fc-redirect decommission-switch This Command removes any FC-Redirect configuration and disables FC-Redirect on this switch. Its usage is generally recommended in the following cases: 1) After 'write erase' 2) When removing the switch from the fabric. If NOT for the above, Decommissioning a switch MAY result in DATA CORRUPTION. Do you want to continue? (Yes/No) [No] Yes Please check the following before proceeding further: 1) Hosts / targets connected locally are NOT involved in any FC-Redirect configuration. 2) No application running on this switch created an FC-Redirect Configuration Please use the command 'show fc-redirect active-configs' to check these. Do you want to continue? (Yes/No) [No] Yes switch# OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 4-51