HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 357

Chapter 6 Debug Commands debug callhome Send documentation comments to [email protected] debug callhome To enable debugging for the Call Home function, use the debug callhome command in EXEC mode. To disable a debug command, use the no form of the command or use the no debug all command to turn off all debugging. debug callhome {all | events | mts} no debug callhome {all | events | mts} Syntax Description all events mts Enables debugging for all Call Home features. Enables debugging for all Call Home events. Enables debugging for all Call Home tx/rx packets of MTS. Defaults Disabled. Command Modes EXEC mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines The debug callhome command, when used with the all parameter, displays the troubleshooting information for both Call Home event traces and a dump of the messaging and transaction service (MTS) messages that the Call Home function receives. Note The debug Call Home function displays event traces for both successful and unsuccessful Call Home e-mail transmissions. Examples The following example displays the system output when the debug callhome events command is issued: switch# debug callhome events 2005-03-09T05:37:21 2005 Mar 9 05:37:21 callhome: filling in name field with Test 2005 Mar 9 05:37:21 callhome: filling in the header list 2005 Mar 9 05:37:21 callhome: filling up the chassis list 2005 Mar 9 05:37:21 callhome: filling up the main body list 2005 Mar 9 05:37:21 callhome: filling up the fru list 2005 Mar 9 05:37:21 callhome: Entering function do_event_correlation 2005 Mar 9 05:37:21 callhome: getting dest profiles for alert group test 2005 Mar 9 05:37:21 callhome: getting dest profiles for alert group cisco-tac 2005 Mar 9 05:37:21 callhome: Applying the event rule for destination profile full_txt 2005 Mar 9 05:37:21 callhome: Applying the event rule for destination profile short_txt 2005 Mar 9 05:37:21 callhome: Applying the event rule for destination profile xml 2005 Mar 9 05:37:21 callhome: Applying the event rule for destination profile basu 2005 Mar 9 05:37:21 callhome: Exiting function do_event_correlation OL-18089-01, Cisco MDS NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 6-7