HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 882

qos class-map Chapter 19 Q Commands Send documentation comments to [email protected] qos class-map To create and define a traffic class with match criteria that will be used to identify traffic, use the qos class-map command in configuration mode. To remove a previously-configured class, use the no form of the command. qos class-map class [match-all | match-any] no qos class-map class Syntax Description class-name match-all match-any Specifies a class map name. Maximum length is 63 alpha-numeric characters. Specifies a logical AND operator for all matching statements in this class. (default). Specifies a logical OR operator for all matching statements in this class. Defaults match-all Command Modes Configuration mode. Command History Release 1.0(2) Modification This command was introduced. Usage Guidelines You can access this command only if you enable the QoS data traffic feature using the qos enable command. Examples The following example shows how to create a QoS class map and enter class map configuration mode. switch# config terminal switch(config)# qos class-map MyClass1 switch(config-cmap)# Related Commands Command show qos Description Displays configured QoS information. 19-2 Cisco MDS 9000 Family Command Reference OL-18089-01 Cisco MDS NX-OS Release 4.x