HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 990

snmp-server host Chapter 21 S Commands Send documentation comments to [email protected] snmp-server host To specify the recipient of an SNMP notification, use the snmp-server host global configuration command. To remove the specified host, use the no form of the command. snmp-server host host-address [traps | informs] [version {1 | 2c | 3 [auth | noauth | priv]}] community-string [udp-port port] no snmp-server host host-address [traps | informs] [version {1 | 2c | 3 [auth | noauth | priv]}] community-string [udp-port port] Syntax Description host-address traps informs version 1 2c 3 auth noauth priv community-string udp-port port Specifies the name or IP address of the host (the targeted recipient). (Optional) Sends SNMP traps to this host. (Optional) Sends SNMP informs to this host. (Optional) Specifies the version of the Simple Network Management Protocol (SNMP) used to send the traps. Version 3 is the most secure model, as it allows packet encryption with the priv keyword. SNMPv1 (default). This option is not available with informs. SNMPv2C. SNMPv3 has three optional keywords (auth, no auth (default), or priv). (Optional) Enables Message Digest 5 (MD5) and Secure Hash Algorithm (SHA) packet authentication (Optional) Specifies the noAuthNoPriv security level. (Optional) Enables Data Encryption Standard (DES) packet encryption (privacy). (Optional) Sends a password-like community string with the notification operation. (Optional) Specifies the port UDP port of the host to use. The default is 162. Defaults Sends SNMP traps. Command Modes Configuration mode. Command History Release 1.0(3) Modification This command was introduced. Usage Guidelines If you use the version keyword, one of the following must be specified: 1, 2c, or 3. Examples The following example specify the recipient of an SNMP notification. switch# config terminal 21-52 Cisco MDS 9000 Family Command Reference OL-18089-01, Cisco MDS NX-OS Release 4.x