HP Cisco MDS 9120 Cisco MDS 9000 Family Command Reference Guide - Release 4.x - Page 333

Chapter 5 D Commands dmm module job Send documentation comments to [email protected] Command History Release NX-OS 4.1(1b) 3.3(1a) Modification The set-vi and modify rate keywords were introduced. The finish keyword is introduced. Usage Guidelines DMM must be enabled before you can create DMM jobs. Use the ssm enable feature dmm command to enable DMM. The data migration job stops executing if it encounters any errors. To restart the migration, enter the validate command to validate the job configuration, then enter the restart command to restart the job. Before creating a storage based data migration job, use the show dmm module vi-list command to choose the VI for migrating the data and then use the set-vi command to specify the VI. Examples The following example shows how to create a job with a schedule. The job is scheduled to start on Sunday, January 6, 2008 at 11:00 P.M. switch# config t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# dmm module 3 job 1 schedule hour 23 min 0 day 6 month 1 year 2008 Command Description show dmm job Displays DMM job information. show dmm module vi-list Displays the list of VIs. show dmm ip-peer Displays the IP peers that the DMM port is connected to. OL-18089-01, Cisco NX-OS Release 4.x Cisco MDS 9000 Family Command Reference 5-41