HP LaserJet Enterprise 500 Service Manual - Page 380

Table 3-21 General Settings menu (continued) First level Second level Third level Fourth level Transfer Control Values Normal* Alternate 1 Alternate 2 Alternate 3 Fuser Temp Normal* Alternate Description Use this setting to correct transfer issues in print jobs. Turn this feature on if green, mottled images are printed on the page. Note that using this mode can increase problems with blurry images or specks of toner on the leading or trailing edge of the paper. The default setting is Normal. The Alternate 1 setting reduces the T1 bias and should be used when re-transfer occurs. The Alternate 2 setting increases the interpage gap. Using this setting reduces throughput and might decrease the printcartridge life. The Alternate 3 setting applies the Alternate 1 and Alternate 2 settings at the same time. Use this setting if the first two settings do not correct the problem. If you are seeing a faint image of the page repeated at the bottom of the page or on the following page, you should first make sure the Paper Type and Print Mode settings are correct for the type of paper you are using. If you continue to see ghost images on your print jobs, set the Fuser Temp feature to the Alternate setting. 344 Chapter 3 Solve problems ENWW