HP LaserJet Enterprise 500 Service Manual - Page 386

Table 3-23 General Print Settings menu (continued) First level Second level Values Personality Auto* PCL PS PDF PCL Form Length Range: 5 - 128 Default = 60 Orientation Font Source Font Number Portrait* Landscape Internal* Soft USB Range: 0 - 999 Default = 0 Description Use this feature to configure the default print language or personality for the product. Normally you should not change the product language (the default is Auto). If you change the setting to a specific product language, the product does not automatically switch from one language to another unless specific software commands are sent to it. Use this menu to control the PCL print-command options. PCL is a set of printer commands that Hewlett-Packard developed to provide access to printer features. Form Length Use this feature to select the usersoft default vertical form length. The range is from 5 to 128 lines. The factory default setting is 60 lines. Select the orientation that is most often used for copy or scan originals. Select Portrait if the short edge is at the top or select Landscape if the long edge is at the top. Use this feature to select the font source for the user-soft default font. The factory default setting is Internal. The list of available options varies depending on the installed product options. Use this feature to specify the font number for the user-soft default font using the source that is specified in the Font Source menu item. The product assigns a number to each font and lists it on the PCL font list. The font number appears in the Font # column of the printout. 350 Chapter 3 Solve problems ENWW