HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - User Guide - Page 149
Administration, Initial Setup, E-mail Setup, Test Send Gateway, support/ljm9040mfp, support
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 149 highlights
Test the SMTP settings 1. From the Home screen, touch Administration. 2. Touch Initial Setup. 3. Touch E-mail Setup, and then touch Test Send Gateway. If the configuration is correct, Gateways OK appears on the control-panel display. If the first test was successful, send an e-mail to yourself by using the digital-send feature. If you receive the e-mail, you have successfully configured the digital-sending feature. If you do not receive the e-mail, use these actions to resolve issues with the digital-sending software: ● Check the SMTP and address to make sure that you typed them correctly. ● Print a configuration page. Verify that the SMTP gateway address is correct. ● Make sure that the network is operating correctly. Send an e-mail to yourself from a computer. If you receive the e-mail, the network is operating correctly. If you do not receive the e-mail, contact your network administrator or Internet service provider (ISP). ● Run the DISCOVER.EXE file. This program attempts to find the gateway. You can download the file from the HP Web site at www.hp.com/support/ljm9040mfp or www.hp.com/support/ ljm9050mfp. ENWW Configure the device to send e-mail 135