HP LaserJet M9040/M9050 HP LaserJet M9040/M9050 MFP - User Guide - Page 179
Security features, Secure the embedded Web server, Foreign Interface Harness (FIH), Requirements
View all HP LaserJet M9040/M9050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 179 highlights
Security features This section explains important security features that are available for the MFP: ● Secure the embedded Web server ● Foreign Interface Harness (FIH) ● Secure Disk Erase ● Security Lock ● Authentication ● Lock the control-panel menus Secure the embedded Web server Assign a password for access to the embedded Web server so that unauthorized users cannot change the MFP settings. 1. Open the embedded Web server. See Embedded Web server on page 152. 2. Click the Settings tab. 3. On the left side of the window, click Security. 4. Type the password next to New Password, and type it again next to Verify Password. 5. Click Apply. Make note of the password and store it in a safe place. Foreign Interface Harness (FIH) The Foreign Interface Harness (FIH) provides a portal on the MFP. By using the FIH and third-party equipment, you can track information about copies that are made on the MFP. Requirements ● Windows 9X, Windows Me, Windows 2000, or Windows XP ● Access to third-party accounting hardware solutions, such as Equitrac or Copitrak devices Use the FIH To use the FIH, you must download and install the FIH software. The software is available from www.hp.com/go/ljm9040mfp_software or www.hp.com/go/ljm9050mfp_software. The software is used to enable or disable the FIH portal. Use the software to set and change the administrator personal identification number (PIN). Administrators can use the PIN option to configure the FIH to prevent any unauthorized changes. Changes can be made only with the correct PIN authentication. NOTE: It is important to remember the PIN that is assigned to the FIH administration software. The PIN is required to make any changes to the FIH. ENWW Security features 165