HP LaserJet Pro M1212nf HP LaserJet M1130/M1210 MFP User Guide - Page 151

The control panel shows a low-memory error. Cause Solution The fax might be too large, or the resolution might be too high. Try one of the following: ● Divide a large fax into smaller sections, and then fax them individually. ● Clear stored faxes to make more memory available for outgoing faxes. ● Configure the outgoing fax as a delayed fax, and then verify that it will send completely. ● Make sure that the product is using the lowest resolution setting (Standard). Faxes are transmitting very slowly. Cause Solution The fax might be very complex, such as one with many graphics. Complex faxes take longer to be sent or received. Breaking longer faxes into multiple jobs and decreasing the resolution can increase the transmission speed. The receiving fax machine might have a slow modem speed. The product sends the fax only at the fastest modem speed that the receiving fax machine can accept. The resolution at which the fax was sent might be very high. To send the fax, lower the resolution and resend the fax. The telephone line might be experiencing line noise. Hang up and resend the fax. Have the telephone company check the telephone line. The fax is being sent via an international call. The original document has a colored background. If the fax is being sent via a digital phone line, contact the service provider. Allow more time to transmit fax jobs internationally. Reprint the original document with a white background, and then resend the fax. ENWW Solve fax problems 137