HP ScanJet Enterprise Flow N6600 User Guide - Page 40
Automatically delete blank s, Automatically adjust orientation
View all HP ScanJet Enterprise Flow N6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
● Page Sides ● Page Size ● Color Mode ● Destination/File Type Automatically delete blank pages When the Delete blank pages feature is enabled, scanned pages are evaluated for content. Pages detected as blank show up in the viewer with a delete notation on them. These detected blank pages are deleted automatically when the scan is saved to the destination. 1. Open the HP Scan software. 2. Select a scan shortcut. 3. Click More. Select the Document tab, select Delete blank pages from the Adjust documents drop-down box, and then click OK. TIP: The Sensitivity slider allows you to adjust the sensitivity value on how blank pages are detected and deleted. At the lower end of the slider, more pages are detected as blank and deleted. At the upper end of the slider, pages must be almost completely blank to be detected and deleted. The sensitivity value can be also set by entering a value or clicking the arrow buttons. Automatically adjust page orientation Use this feature to automatically adjust page orientation by language. 1. Open the HP Scan software. 2. Select a scan shortcut. 3. Click More. Under the Scan tab, select the Page Orientation drop-down box, and then select the Auto Orient check box. 4. Select a document language, click OK, and then start scan. Reserved Jobs (N4600 fnw1 and N6600 fnw1 models) The Reserved Jobs feature allows you to initiate a job from the HP Scan software on the computer with preset options, and then trigger the job on the scanner, saving trips between the scanner and the computer. 1. If this is the first time you have used this feature, you need to reserve a scan job from the HP Scan software first. a. On your computer, open the HP Scan software, and then click Job Reservation. b. In the Job Reservation Settings dialog box, select Enable Reservation. c. If you want to set a PIN, select Use PIN, enter a PIN, and then click OK. 2. Select a scan shortcut, change settings if needed, and then click Scan. 3. Go to the scanner. Load the original into the input tray or on the scanner glass. 4. From the Home screen on the control panel, touch Reserved Jobs to start scan. 34 Chapter 2 Use the scanner