HP ScanJet Enterprise Flow N6600 User Guide - Page 47
Clean the scanning strips, To clean the scanning strip components, follow these steps
View all HP ScanJet Enterprise Flow N6600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
2. Lift up the document feeder. 3. Use a clean, lint-free cloth moistened with water or spray the glass cleaner on a clean, lint-free cloth, and then thoroughly clean the flatbed scanner glass. CAUTION: Do not spray the glass cleaner directly on the scanner glass as this might cause permanent damage. 4. Dry the scanner glass with a dry, soft, lint-free cloth. NOTE: Make sure to dry the scanner glass completely. 5. Close the document feeder. Press the Power button to turn on the scanner. The scanner is now ready to use. Clean the scanning strips To clean the scanning strip components, follow these steps: 1. Press the Power button to turn off the scanner, and then disconnect the USB cable and power supply from the scanner. 2. Lift up the document feeder. 3. Clean the scanning strips with a soft, lint-free cloth that has been sprayed with a mild glass cleaner. Clean the scanning strips 41