HP Smart Tank Plus 650 User Guide - Page 95

Figure 5-13 Back view of the printer 1 Telephone wall jack 2 "IN" phone port on your computer 3 "OUT" phone port on your computer 4 Use a minimum 26 AWG phone cord to connect to the port on the printer. You might need to connect the phone cord to your country/region adapter. 5 Computer with modem 6 Answering machine 7 Telephone (optional) To set up the printer on the same phone line as a computer with two phone ports 1. Remove the white plug from the port on the printer. 2. Find the phone cord that connects from the back of your computer (your computer dial-up modem) to a telephone wall jack. Disconnect the cord from the telephone wall jack and plug it into the port on the printer. 3. Unplug your answering machine from the telephone wall jack, and connect it to the port labeled "OUT" on the back of the computer (the computer dial-up modem). 4. Using the phone cord, connect one end to your telephone wall jack, then connect the other end to the port on the printer. NOTE: You might need to connect the phone cord to your country/region adapter. 5. (Optional) If your answering machine does not have a built-in phone, for convenience you might want to connect a phone to the back of your answering machine at the "OUT" port. NOTE: If your answering machine does not let you connect an external phone, you can purchase and use a parallel splitter (also known as a coupler) to connect both the answering machine and telephone to the printer. You can use standard phone cords for these connections. ENWW Additional fax setup 89