HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 174
Managing Cartridges, Unloading a Cartridge from a Drive, Freeing up Storage Space
View all HP StorageWorks 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 174 highlights
NOTE: The password can also be changed from the VLS CLI. See CLI Management commands. Managing Cartridges You can change the following parameters for existing cartridges from the Cartridge Parameters window: • Library with which they are associated • Capacity • Write access Unloading a Cartridge from a Drive If a tape becomes stuck in a drive and cannot be removed using the backup application, unload the tape using Command View VLS: 1. Select the tape drive from the navigation tree 2. From the task bar, select Force Unload. This will return the tape to its original slot. NOTE: Upon reboot of the VLS or restart emulations, all cartridges that were in drives will NOT be returned to their original slots. They will be loaded back into the drives. Use Force Unload to return them to their original slots if needed. Freeing up Storage Space Storage space can be freed up by erasing the data on or destroying virtual media that is no longer used, such as: • Cartridges that are no longer used by a backup application • Cartridges that have been moved to the Firesafe that are no longer needed Use the backup application to erase data on virtual media that is no longer used. Destroy virtual media that is no longer needed using Command View VLS. See "Destroying Cartridges" on page 170. NOTE: Reducing the size of the cartridges in a virtual library will not free up disk space. Storage space is dynamically assigned by the VLS as it is used. It is not reserved. 174 Management