HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 80
Creating an Echo Copy Pool, Automigration/Replication, Destination Libraries, Copy Pools
View all HP StorageWorks 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
5. In order to restore from a destination cartridge, either load it into a physical drive that is visible to the backup application, or perform a Load for Restore. Load for Restore copies the destination tape back into the virtual cartridge so that the backup application can then restore from the virtual cartridge. Creating an Echo Copy Pool Echo copy pools are created from physical library slots after a destination tape library is added to the VLS automigration configuration. Each echo copy pool defines: • The single destination library • The single source virtual library • The slot range • The echo copy pool policy Each virtual library has a SAN policy, and those used as a replication library will also have a LAN/WAN policy. These policies are set up during the creation procedure. To create an echo copy pool: 1. On the Automigration/Replication tab, expand Destination Libraries on the navigation pane so that you can see all the related items. 2. Expand the destination library for which you want to create a pool. 3. Select Copy Pools on the navigation pane. 4. From the task bar, select Create Echo Copy Pool. The CREATE ECHO COPY POOL screen displays (see Figure 46). Figure 46 Creating an echo copy pool (LAN/WAN shown) . 5. Enter a start slot number and an end slot number for the copy pool from within the available slot range. 6. Select the local library where your echoed virtual cartridges will be placed from the Local Library list. 80 Automigration/Replication