HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 67
Rebuilding the Storage Pool, Installing Additional Licenses
View all HP StorageWorks 6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
3. Select the storage pool to view in the navigation tree. The storage pool details window opens (Figure 44). Figure 44 Storage Pool details window . Rebuilding the Storage Pool To delete all information on the arrays and reformat them, perform a Rebuild Storage Pool from Command View VLS. CAUTION: Rebuild Storage Pool destroys all current virtual tape cartridges in the system. To rebuild the storage pool: 1. Open a Command View VLS session and log in as the administrator. See "Opening a Command View VLS Session from a Web Browser" on page 135. 2. Select Storage Pools in the navigation tree. 3. Select Rebuild All Storage Pools from the task bar. 4. Select RAID 5 or RAID 6 and pay attention to the warning in red text. 5. Click Rebuild. Installing Additional Licenses Your VLS system may require any of the following licenses: • Capacity - when you have added capacity to the system's base capacity. A VLS capacity license must be installed on the VLS when storage exceeds the base license. If you are in a license violation state, all VLS read/write operations are disabled until either sufficient licenses are installed to support the storage, or the excess storage is removed. When you have cleared a license violation by installing an upgrade capacity license, the VLS read/write operations are automatically enabled without requiring a reboot. The base license on the node enables the storage that is part of the base SKU. The capacity bundle includes the capacity license and the registration materials necessary for installing capacity licenses. HP StorageWorks 67