HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 245

8 Power LED (green) Off 9 Fault LED (amber) On Status No power to this specific power supply -OrPower supply failure Blinking Off AC power present System in standby mode On Off Power supply on and working properly On Blinking Power supply current limit exceeded Table 13 Hard drive LED combinations Activity LED Online LED Fault LED On Off Off Status Do not remove the drive. Removing a drive during this process causes data loss. The drive is being accessed and is not configured as part of an array. Do not remove the drive. Removing a drive during this pro- On Flashing Off cess causes data loss. The drive is rebuilding or undergoing capacity expansion. Flashing Flashing Flashing Do not remove the drive. Removing a drive during this process causes data loss. The drive is part of an array being selected by the Array Configuration Utility. -Or- The Options ROMPaq is upgrading the drive. OK to replace the drive online if a predictive failure alert is received, and the drive is attached to an RAID controller. The drive is not configured as part of an array. -Or- Off Off Off If this drive is part of an array, then a powered-on controller is not accessing the drive .-Or- The drive is configured as an online spare. OK to replace the drive online. Off Off On The drive has failed and has been placed off-line. OK to replace the drive online if a predictive failure alert is received (refer to the following section for details), provided Off On Off that the array is configured for fault tolerance and all other drives in the array are online. The drive is online and configured as part of an array. HP StorageWorks 245