HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 202

Command close getHost connect Description Closes the connection to the VLS. Displays the fully qualified name of the VLS and its IP address. Connects to a host. Where can be: -a - Host name (localhost is default) (optional) -p - Password (optional) -u - userid (optional) Output Commands Use the CLI commands in CLI output commands to control the output and display help information for the CLI commands. Table 7 CLI output commands Command trace verbose version help Description Displays the stack trace after an exception has occurred. Toggles verbose output on and off. When on, all messages are output to the screen. Indicates current CLI version. If verbose is on, the module revisions display also. Displays CLI command usage information. Where can be: -c - Provides help information for the specified CLI command. -all - Lists all CLI commands and their help information. enableVlsLog Enables VLS logging. Where the options are: -d - Debug level (1 to 9) (optional) -h - Displays command usage information (optional) disableVlsLog Disables VLS logging. Where the options are: -d - Debug level (1 to 1) (optional) -h - Displays command usage information (optional) VLS Commands This section describes the VLS commands in the VLS CLI command set. Network Settings Configuration Commands Use the CLI commands in CLI network settings configuration commands to configure the VLS network settings via a serial session. See "Opening a Serial Session" on page 139. Changing the network configuration parameters modifies four system files: /etc/hosts /etc/sysconfig/network 202 CLI Command Set