HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 244

Item Description 3 External health LED 4 Power On/Standby button 5 Hard drive activity LED 6 Hard drive online status LED 7 Hard drive fault status LED 8-9 Power supply LEDs Status • Green = System health is normal. • Amber = System is degraded. To identify the component in a degraded state, refer to the QuickFind Diagnostic Display LEDs. • Red = System is critical. To identify the component in a critical state, refer to QuickFind Diagnostic Display LEDs. • Off = System health is normal (when in standby mode). • Green = System is on. • Amber = System is shut down (auxiliary power only). • Off = Power cord is not attached, power supply failure has occurred, no power supplies are installed, or facility power is not available. • On = Drive activity. • Flashing = High activity on the drive or drive is being configured as part of an array. • Off = No drive activity. For more information about the meaning of the various hard drive LED illumination patterns, see Hard drive LED combinations. • On = Drive is part of an array and is currently working. • Flashing = Online activity. • Off = No online activity. For more information about the meaning of the various hard drive LED illumination patterns, see Hard drive LED combinations. • On = Drive failure. • Flashing = Fault process activity. • Off = No fault process activity. For more information about the meaning of the various hard drive LED illumination patterns, see Hard drive LED combinations. See Power supply LED combinations. Table 12 Power supply LED combinations 8 Power LED (green) 9 Fault LED (am- ber) Status Off Off No AC power 244 Component Identification