HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 253

Front Panel LEDs Item 1 2 Description Status Hard drive fault/ID bicolor LED Blue = The unit identification button on the rear of the disk array has been pressed. Amber = The drive has failed or is predicted to fail in the near future. Hard drive online LED Green = The drive is online. Off = The drive is offline or the disk array is powered down. For more information about the meaning of the various hard drive LED illumination patterns, see Hard drive LED combinations. Table 14 Hard Drive LED Combinations Online LED (green) Fault/ID LED (amber/blue) Status On, off, or flashing Alternating between amber and blue The drive has failed, or a predictive failure alert has been received for this drive. It has also been selected by the VLS management application. On, off, or flashing Steadily blue The drive is operating normally, and it has been selected by the VLS management application. On Amber, flashing regularly (1 Hz) A predictive failure alert has been received for this drive. Replace the drive as soon as possible. On Off The drive is online, but it is not currently active. Flashing regularly (1 Hz) Amber, flashing regularly (1 Hz) A predictive failure alert has been received for this drive. To minimize the risk of data loss, replace the drive. Flashing regularly (1 Hz) Off The drive is rebuilding. Flashing irregularly Amber, flashing regularly (1 Hz) The drive is active, but a predictive failure alert has been received for this drive. Replace the drive as soon as possible. Flashing irregularly Off The drive is active, and it is operating normally. A critical fault condition has been identified for this drive, and Off Steadily amber the controller has placed it offline. Replace the drive as soon as possible. Off Amber, flashing regularly (1 Hz) A predictive failure alert has been received for this drive. Replace the drive as soon as possible. HP StorageWorks 253