HP StorageWorks 6000 HP StorageWorks 6000-series Virtual Library System User G - Page 250

Item Description Status 5 Temperature Off = Normal On = Attention required 6 DIMM Off = Normal On = Attention required Off = Normal 7 I/O power fault On = Attention required 8 Therm trip Off = Normal On = Attention required Off = Normal 9 SCSI interlock On = Attention required Off = Normal 10 Power supply 1 On = Attention required Off = Normal 11 Power supply 2 On = Attention required Action One or more components have experienced an elevated temperature or a thermal shutdown. A thermal shutdown is indicated by the Therm Trip LED. • Be sure the processor heatsink is properly attached. • Be sure there are no 1.7" DIMMs installed that prevent airflow across the processor heatsink). • Be sure that all fans are installed and working properly. • Be sure that the node environment meets posted requirements. For information about node environment requirements refer to the "Optimum environment" section in Chapter 3. DIMM failure or configuration error. Refer to the IML or POST messages A power fault on the system I/O board occurred. If problem persists, replace the system I/O board. The node experienced a thermal shutdown. If one of the CPU thermal LEDs is amber, that CPU experienced an overtemperature condition. • Be sure that the processor heatsink is properly at- tached. For more information, refer to the maintenance and service guide. • Be sure the correct DIMMs (1.2" tall) are installed. • Be sure all fans are installed and working properly For more information, refer to the maintenance and service guide. Ensure the SCSI backplane is installed properly. Reseat SCSI backplane board and hard drives. Look at the LEDs on the front of the power supply and take the appropriate action. Look at the LEDs on the front of the power supply and take the appropriate action. 250 Component Identification