HP StorageWorks 8/80 HP StorageWorks 8-Gb SAN Switch hardware reference manual - Page 24

FCoE Converged Network Switch features, Includes universal ports that self-con as E_Ports

Page 24 highlights

1 Status LED 3 RJ-45 GE ports (for clustering and re-keying) 5 RJ-45 Management port 7 USB port Figure 6 Port side of the Encryption SAN Switch 2 Power LED 4 Smart Card reader 6 RJ-45 Serial Console port 8 Fibre Channel ports (0-31) FCoE Converged Network Switch features The FCoE Converged Network Switch has the following features: • Includes a system motherboard with a Freescale MPC8548 RISC CPU running at 1.3 GHz and integrated peripherals, that provides high performance with low power consumption. • Contains an RJ-45 Ethernet management port, and EZSwitch Setup, which supports switch IP address discovery and configuration. • Integrates a USB port that provides storage for firmware updates, as well as supportsave command output and configuration uploads and downloads. NOTE: The supportsave command output and configuration upload/download functions are only for the FC portion of the switch. These functions do not apply to the CEE portion of the switch. • Provides two hot-swappable, redundant power supply FRUs. • Provides three hot-swappable fan FRUs in an N+1 configuration to provide hardware-redundant cooling. • Includes universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports. • Provides extensive diagnostics and system-monitoring capabilities for enhanced Reliability, Avail- ability, and Serviceability (RAS). • Provides FCoE-to-FC latency of 1,670 ns. The FCoE Converged Network Switch has the following Ethernet capabilities: • Contains 24 ports, 10-GbE CEE. • Provides Low-latency, lossless, deterministic interconnect required for FCoE. • Provides FCoE support with Fabric Provided MAC Address (FPMA) discovery. Fabric OS also enables support for Priority-based Flow Control (802.1Qbb). 24 HP StorageWorks 8-Gb SAN Switches

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110

2 Power LED
1 Status LED
4 Smart Card reader
3 RJ-45 GE ports (for clustering and re-keying)
6 RJ-45 Serial Console port
5 RJ-45 Management port
8 Fibre Channel ports (0
31)
7 USB port
Figure 6 Port side of the Encryption SAN Switch
FCoE Converged Network Switch features
The FCoE Converged Network Switch has the following features:
Includes a system motherboard with a Freescale MPC8548 RISC CPU running at 1.3 GHz and
integrated peripherals, that provides high performance with low power consumption.
Contains an RJ-45 Ethernet management port, and EZSwitch Setup, which supports switch IP address
discovery and configuration.
Integrates a USB port that provides storage for firmware updates, as well as
supportsave
command output and configuration uploads and downloads.
NOTE:
The supportsave command output and configuration upload/download functions are only for the
FC portion of the switch. These functions do not apply to the CEE portion of the switch.
Provides two hot-swappable, redundant power supply FRUs.
Provides three hot-swappable fan FRUs in an N+1 configuration to provide hardware-redundant
cooling.
Includes universal ports that self-configure as E_Ports, F_Ports, M_Ports, or FL_Ports.
Provides extensive diagnostics and system-monitoring capabilities for enhanced Reliability, Avail-
ability, and Serviceability (RAS).
Provides FCoE-to-FC latency of 1,670 ns.
The FCoE Converged Network Switch has the following Ethernet capabilities:
Contains 24 ports, 10-GbE CEE.
Provides Low-latency, lossless, deterministic interconnect required for FCoE.
Provides FCoE support with Fabric Provided MAC Address (FPMA) discovery. Fabric OS also
enables support for Priority-based Flow Control (802.1Qbb).
HP StorageWorks 8-Gb SAN Switches
24