HP StorageWorks 8/80 HP StorageWorks 8-Gb SAN Switch hardware reference manual - Page 67

Nonport side LED activity for FCoE Converged Network Switches

Get HP StorageWorks 8/80 - SAN Switch PDF manuals and user guides View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

Slow blinking amber Receiving light or carrier, but (2 seconds) not online Verify that the diagnostic tests are not running. Re-enable the port using the portEnable command. Fast blinking amber (1/2 second) Port failure Check the management interface and the error log for details on the cause of the failure. Contact HP technical support if necessary. Steady green Online No action required. Slow blinking green (2 seconds) Online but segmented (loopback cable or incompatible switch) No action required. Fast blinking green (1/2 second) Internal loopback (diagnostic) No action required. Flickering green Online; frames flowing through port No action required. Nonport side LED activity for FCoE Converged Network Switches Figure 29 shows the LEDs on the nonport side of the switch. See Figure 8 on page 26 for power supply and fan assembly locations. 1. Power supply #2 status LED 2. Power supply #1 status LED 3. Fan assembly #3 status LED 4. Fan assembly #2 status LED 5. Fan assembly #1 status LED Figure 29 Nonport side LEDs on the FCoE Converged Network Switch 8-Gb SAN Switch hardware reference manual 67

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
Verify that the diagnostic tests are
not running. Re-enable the port us-
ing the
portEnable
command.
Receiving light or carrier, but
not online
Slow blinking amber
(2 seconds)
Check the management interface
and the error log for details on the
cause of the failure. Contact HP
technical support if necessary.
Port failure
Fast blinking amber
(1/2 second)
No action required.
Online
Steady green
No action required.
Online but segmented (loopback
cable or incompatible switch)
Slow blinking green
(2 seconds)
No action required.
Internal loopback (diagnostic)
Fast blinking green
(1/2 second)
No action required.
Online; frames flowing through
port
Flickering green
Nonport side LED activity for FCoE Converged Network
Switches
Figure 29
shows the LEDs on the nonport side of the switch. See
Figure 8
on page 26 for power
supply and fan assembly locations.
4. Fan assembly #2 status LED
1. Power supply #2 status LED
5. Fan assembly #1 status LED
2. Power supply #1 status LED
3. Fan assembly #3 status LED
Figure 29 Nonport side LEDs on the FCoE Converged Network Switch
8-Gb SAN Switch hardware reference manual
67