HP StorageWorks 8/80 HP StorageWorks 8-Gb SAN Switch hardware reference manual - Page 41

Table 10, for securing the inner rails. Use

Get HP StorageWorks 8/80 - SAN Switch PDF manuals and user guides View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

• For an HP System/e Rack, install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock-washers and two #10 alignment washers in upper and lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with captive star lock-washers and two #10 alignment washers in the upper and lower hole locations of the left rail. See Figure 15. Figure 15 Assembling the outer rails (HP System/e Rack) 5. Depending on the device model, the SAN Switch Rack Mount Kit requires different screw types for securing the inner rails. Use Table 10 to determine the number and screw type for your specific switch. CAUTION: Do not use any screws other than those provided. Using longer screws than those provided can cause damage to internal components. Table 10 Number of screws required to assemble the inner rails to the switch Device model 8/8 SAN Switch 8/24 SAN Switch 8/40 SAN Switch 8/80 SAN Switch #8-32 x 5/16-inch #8-32 x 3/16-inch screws screws Ten (five per rail) N/A Encryption SAN Switch FCoE Converged Network Switch Six (three per rail) N/A 8-Gb SAN Switch hardware reference manual 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
•
For an HP System/e Rack, install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock-washers and two #10 alignment washers in upper and lower hole loc-
ations of the right rail. Then install two #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock-washers and two #10 alignment washers in the upper and lower hole
locations of the left rail. See
Figure 15
.
Figure 15 Assembling the outer rails (HP System/e Rack)
5.
Depending on the device model, the SAN Switch Rack Mount Kit requires different screw types
for securing the inner rails. Use
Table 10
to determine the number and screw type for your specific
switch.
CAUTION:
Do not use any screws other than those provided. Using longer screws than those provided
can cause damage to internal components.
Table 10 Number of screws required to assemble the inner rails to the switch
#8-32 x 3/16-inch
screws
#8-32 x 5/16-inch
screws
Device model
N/A
Ten (five per rail)
8/8 SAN Switch
8/24 SAN Switch
8/40 SAN Switch
8/80 SAN Switch
N/A
Six (three per rail)
Encryption SAN Switch
FCoE Converged Network Switch
8-Gb SAN Switch hardware reference manual
41