HP StorageWorks 8/80 HP StorageWorks 8-Gb SAN Switch hardware reference manual - Page 37
SAN Switch Rack Mount Kit hardware, shown in, SAN Switch
View all HP StorageWorks 8/80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
The following items are required to install the switch in a rack: • SAN Switch • Power cables • #2 Phillips screwdriver • 7/16-inch wrench or socket • Plenum (if required). For 8-Gb models, a plenum is required for 8/8 and 8/24 SAN Switches only. • SAN Switch Rack Mount Kit hardware, shown in Table 9, which identifies rails and rail mounting hardware Table 9 SAN Switch Rack Mount Kit hardware Item Description Two rear mounting brackets A right inner rail and a right outer rail A left inner rail and a left outer rail 14 #8-32 x 3/16-inch Phillips pan-head screws with thread lock for use with the SAN Switch 2/32 only. 14 #8-32 x 5/16-inch Phillips pan-head SEMS screws 10 #10-32 x 1/2-inch Phillips pan-head screws with captive star lock-washers Eight #10 alignment washers Eight #10 adapter washers Two 1/4-20 hex nuts with captive star lock-washers Two 1/4-inch flat washers 8-Gb SAN Switch hardware reference manual 37