HP rp5400 Installation Guide, Third Edition - HP rp5400 Family of Servers - Page 40
Install Deskside Server
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Server Unpacking and Installation Install Deskside Server Install Deskside Server The following section describes the installation of a server into a Deskside enclosure for installation in an office environment. WARNING The typical rp54xx system can weigh up to 68kg (150lbs). HP recommends using an approved lifting device. • Lift and move the server in accordance with all local safety regulations. • Do not attempt to lift the server by the plastic handles on the top and side covers. Failure to follow these precautions can cause injury to personnel or damage to equipment. Step 1. Unpack the server. Step 2. Unpack the deskside enclosure. Server Enclosure Outside Cover (Skin) Wheeled Enclosure Base 40 Chapter 2
Server Unpacking and Installation
Install Deskside Server
Chapter 2
40
Install Deskside Server
The following section describes the installation of a server into a Deskside enclosure for installation in an
office environment.
WARNING
The typical rp54xx system can weigh up to 68kg (150lbs).
HP recommends using an
approved lifting device
.
•
Lift and move the server in accordance with all local safety regulations.
•
Do not attempt to lift the server by the plastic handles on the top and side covers.
Failure to follow these precautions can cause injury to personnel or damage to
equipment.
Step 1.
Unpack the server.
Step 2.
Unpack the deskside enclosure.
Wheeled
Enclosure
Base
Server
Enclosure
Outside
Cover
(Skin)