HP rp5400 Installation Guide, Third Edition - HP rp5400 Family of Servers - Page 79
Initial Power-up
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Cabling and Power-Up rp54xx Server Boot Process Initial Power-up The following section describes the process of applying power to the rp54xx Server and booting the system to the UNIX Login prompt. The amount of time it takes to go through self-test then boot the system will vary widely depending on hardware configuration. The following provides a "typical" procedure. Yours may vary depending on software and hardware installed: Step 1. Apply AC Power to the system console. Step 2. Apply power to the rp54xx Server by turning the front panel switch to ON. Power Switch (Under Cover) Chapter 3 79
Cabling and Power-Up
rp54xx Server Boot Process
Chapter 3
79
Initial Power-up
The following section describes the process of applying power to the rp54xx Server and booting the system to
the UNIX Login prompt. The amount of time it takes to go through self-test then boot the system will vary
widely depending on hardware configuration. The following provides a “typical” procedure. Yours may vary
depending on software and hardware installed:
Step 1.
Apply AC Power to the system console.
Step 2.
Apply power to the rp54xx Server by turning the front panel switch to ON.
Power Switch
(Under Cover)