HP rp5400 Installation Guide, Third Edition - HP rp5400 Family of Servers - Page 45

Step 7.

Get HP rp5400 PDF manuals and user guides View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

Server Unpacking and Installation Install Stand-Alone Server in a Cabinet Step 7. Take the left hand slide/bracket assembly (marked 337079-1L) and install it into the left hand vertical mounting posts. This is done by inserting the pin at the rear of the slide's mounting bracket into the 23rd hole in the rear vertical mounting post and inserting the hook at the front of the bracket into the vertical, rectangular slot in the aluminum spacer. The slide should be positioned in the cabinet so that it is horizontal and level. Guide Pin Hook Step 8. Securely fasten the rear of the slide's mounting bracket to the rear vertical mounting post by installing and tightening two of the M5 x 16 screws with cress-cup washers thorough the mounting post, through the slides mounting bracket and into the threaded nuts attached to the mounting bracket. Step 9. Fully extend the slide so that it is locked in the fully open position. Chapter 2 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
Server Unpacking and Installation
Install Stand-Alone Server in a Cabinet
Chapter 2
45
Step 7.
Take the left hand slide/bracket assembly (marked 337079-1L) and install it into the left hand
vertical mounting posts. This is done by inserting the pin at the rear of the slide's mounting bracket
into the 23rd hole in the rear vertical mounting post and inserting the hook at the front of the
bracket into the vertical, rectangular slot in the aluminum spacer. The slide should be positioned in
the cabinet so that it is horizontal and level.
Step 8.
Securely fasten the rear of the slide's mounting bracket to the rear vertical mounting post by
installing and tightening two of the M5 x 16 screws with cress-cup washers thorough the mounting
post, through the slides mounting bracket and into the threaded nuts attached to the mounting
bracket.
Step 9.
Fully extend the slide so that it is locked in the fully open position.
Hook
Guide Pin