HP rp5400 Installation Guide, Third Edition - HP rp5400 Family of Servers - Page 42
Step 7., Pull-tab and label shown above is for an rp74xx Server. rp54xx uses the same style
View all HP rp5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Server Unpacking and Installation Install Deskside Server Step 7. Locate the two pull-tabs. One pull-tab is longer than the other. The shorter pull-tab is blank on both sides. The back of the shorter pull-tab provides a writable surface for twin use. Step 8. Locate the plastic bag containing the label sheet (taped to the server). Step 9. Remove the label containing serial number, base product, processor product, and model information from the label sheet and apply to the back of the longer pull-tab. NOTE Pull-tab and label shown above is for an rp74xx Server. rp54xx uses the same style label and similar pull-tab. Step 10. Insert the pull-tabs into the front bezel. Install the longer pull-tab in the left side plastic window in such a way that the rp54xx logo is visible. Install the shorter pull-tab in the right side plastic window with either surface visible. Refer to the diagram above for pull-tab locations. 42 Chapter 2