IBM 436854u User Manual - Page 44
Attention
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Attention: To avoid breaking the retaining clips or damaging the DIMM connectors, open and close the clips gently. 5. Open the retaining clips and, if necessary, remove any existing DIMM. 6. Touch the static-protective package that contains the DIMM to any unpainted metal surface on the server. Then, remove the new DIMM from the package. 7. Turn the DIMM so that the DIMM keys align correctly with the connector. 8. Insert the DIMM into the connector by aligning the edges of the DIMM with the slots at the ends of the DIMM connector. Firmly press the DIMM straight down into the connector by applying pressure on both ends of the DIMM simultaneously. The retaining clips snap into the locked position when the DIMM is firmly seated in the connector. If there is a gap between the DIMM and the retaining clips, the DIMM has not been correctly installed. Open the retaining clips, remove the DIMM, and then reinsert it. If you have other devices to install or remove, do so now; otherwise, go to "Completing the installation" on page 52. 30 System x3200 M2 Types 4367 and 4368: User's Guide