IBM 436854u User Manual - Page 75
Configuration
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
- IPMI Specification Version This nonselectable item displays the IPMI specification version. - BMC Firmware Version This nonselectable item displays the mini-BMC firmware version. - BMC Build Date This nonselectable item displays the date that the mini-BMC code was built. - BMC Build Level This nonselectable item displays the version of the mini-BMC code. - Existing Event Log number This nonselectable item displays the number of entries in the system-event log. - BMC POST Watchdog This option enables or disables the POST watchdog. Disabled is the default setting. - BMC POST Watchdog Timeout This option enables or disables the mini-BMC POST watchdog timer. - System - BMC Serial Port Sharing Select this choice to specify whether the serial port that the mini-BMC uses is shared with the other system components or is dedicated to the mini-BMC. When this option is enabled, the mini-BMC controls the serial port by way of remote commands. If this option is disabled, the serial port is assigned to the mini-BMC, unless the BMC Serial Port Access Mode option is disabled. - BMC Serial Port Access Mode Select this choice to set the mini-BMC access mode for the system serial port. Shared is the default setting. You can choose from the following access modes: Shared The serial port is available for use by POST and the operating system; however, the mini-BMC can still monitor the serial data for a take-control sequence. Pre-Boot The mini-BMC has control of the serial port prior before the operating system is booted; however, after the operating system is booted, the mini-BMC will not have access to the serial port until you turn off the server or reset the settings. Dedicated The mini-BMC has complete control of the serial port. POST and the operating system will not be allowed to use the serial port. Disabled The mini-BMC has access to the serial port. - Reboot System on NMI This option sets the mini-BMC timer to automatically reboot the server after an NMI occurs. Enabled is the default setting. - User Account Settings Select this choice to view the user account settings for the mini-BMC. - BMC Network Configuration Select this choice to configure specific network settings for the mini-BMC. Chapter 3. Configuring the server 61