IBM 436854u User Manual - Page 68
Reinstalling, cover
UPC - 883436026772
View all IBM 436854u manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Reinstalling the side cover If you removed the bezel, reinstall it before you reinstall the side cover. See "Reinstalling the two-piece bezel" on page 52. Note: The rear adapter-retention bracket rests against the server side cover. You might find it easier to lay the server on its side to replace the side cover. To reinstall the side cover, complete the following steps: 1. Before you install the side cover, make sure that all cables, adapters, and other components are installed and seated correctly and that you have not left loose tools or parts inside the server. Also, make sure that all internal cables are correctly routed. Note: The cover-release latch must be in the unlocked (opened) position before you install the side cover. 2. Position the lip on the bottom edge of the side cover on the ledge on the bottom of the chassis; then, rotate the cover up to the chassis, and then press down on the cover release latch and push the cover completely closed until it latches securely into place. Cover-release latch Key lock 3. Close the cover-release latch to secure the side cover in place. 4. Lock the side cover. 54 System x3200 M2 Types 4367 and 4368: User's Guide