IBM 79856au User Guide - Page 104
Requirements, Cabling, Remote, Supervisor, Adapter, SlimLine, Installing, firmware
UPC - 883436004374
View all IBM 79856au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Note: The Web-based interface and text-based interface do not support double-byte character set (DBCS) languages. Requirements Make sure that the following requirements are met: v The Web interface Remote Disk function requires the client system to be running Microsoft Windows 2000 or later. The Web interface Remote Control features require the Java™1.4 Plug-in or later. The following Web browsers are supported: - Microsoft Internet Explorer version 5.5 or later with the latest Service Pack - Netscape Navigator version 7.0 or later - Mozilla version 1.3 or later v If you plan to configure Simple Network Management Protocol (SNMP) trap alerts on the Remote Supervisor Adapter II SlimLine, install and compile the management information base (MIB) on your SNMP manager. v You will need an Internet connection to the client system to download software and firmware from the IBM Support Web site during the installation process. The Remote Supervisor Adapter II SlimLine firmware and the SNMP MIB are available on the ServerGuide Setup and Installation CD; the latest versions are available at http://www.ibm.com/servers/eserver/support/xseries/index.html. Cabling the Remote Supervisor Adapter II SlimLine You can manage the server remotely through the Remote Supervisor Adapter II SlimLine by using the dedicated systems-management Ethernet connector on the rear of the server. For additional information about network configuration, see the Remote Supervisor Adapter II Installation Guide. To cable the Remote Supervisor Adapter II SlimLine, complete the following steps: 1. Connect one end of a Category 3 or Category 5 Ethernet cable to the dedicated systems-management Ethernet connector. See "Rear view" on page 12 for the location of the systems-management Ethernet connector. 2. Connect the other end of the cable to the network. Installing the Remote Supervisor Adapter II SlimLine firmware The software and firmware files that you need are contained in one system service package installation kit. The kit contains the following files: v Software and firmware installation instructions v BIOS code update with support for the Remote Supervisor Adapter II SlimLine v Diagnostics code update v Remote Supervisor Adapter II SlimLine device drivers v Remote Supervisor Adapter II SlimLine firmware update v Integrated service processor firmware update v Video device driver v Firmware-update utility program To download and install the software and firmware, complete the following steps. Note: changes are made periodically to the IBM Web site. The actual procedure might vary slightly from what is described in this document. 90 System x3655 Type 7985: User's Guide