IBM 79856au User Guide - Page 76
Installing, cover, Connecting, cables
UPC - 883436004374
View all IBM 79856au manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Attention: v Install the server only in a rack cabinet with perforated doors. v Do not leave open spaces above or below an installed server in the rack cabinet. To help prevent damage to server components, always install a blank filler panel to cover the open space and to help ensure proper air circulation. See the documentation that comes with the rack cabinet for more information. v Install the server in a rack that meets the following requirements: - Minimum depth of 70 mm (2.8 in.) between the front mounting flange and the inside of the front door - Minimum depth of 157 mm (6.2 in.) between the rear mounting flange and the inside of the rear door - Minimum depth of 718 mm (28.3 in.) and maximum depth of 762 mm (30.0 in.) between the front and rear mounting flanges 5. To attach peripheral devices and connect the power cords, see "Connecting the cables." Installing the cover Cover-release latch To install the cover, complete the following steps: 1. Place the cover-release latch in the open (up) position. 2. Insert the bottom tabs of the top cover into the matching slots in the server chassis. 3. Press down on the cover-release latch to lock the cover in place. 4. Slide the server into the rack. Connecting the cables The following illustrations show the locations of the input and output connectors on the front and rear of the server. 62 System x3655 Type 7985: User's Guide