IBM 79856au User Guide - Page 60

illustration.

Get IBM 79856au - Servers System X3655 Opteron 2.8ghz PDF manuals and user guides
UPC - 883436004374
View all IBM 79856au manuals
Add to My Manuals
Save this manual to your list of manuals

Page 60 highlights

Note: The terminator end of the cable does not go through the slot in the hard disk drive cage. 9. Connect the cables to the back of the tape drive. 10. Push the tape drive assembly into the bays, gently pulling the cables farther into the server as you do so, until the tape drive assembly stops. 11. Push the tray handle to the closed (locked) position. 12. Remove the backing from the hook-and-loop fastener on the SCSI terminator. Attach the terminator to the top of the CD/DVD drive bay as shown in the following illustration. SCSI terminator 13. Connect the tape drive signal cable connector and power cable connector to the system board (See "System-board internal cable connectors" on page 19 for the location of the connectors). 14. Route the SCSI signal cable under the SAS cable, through the slot in the side of the air baffle and connect it to the SCSI adapter. The following illustration shows the routing of the signal cable. Important: Make sure to route the cables so that you do not obstruct access to the fan connectors. 46 System x3655 Type 7985: User's Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
Note:
The
terminator
end
of
the
cable
does
not
go
through
the
slot
in
the
hard
disk
drive
cage.
9.
Connect
the
cables
to
the
back
of
the
tape
drive.
10.
Push
the
tape
drive
assembly
into
the
bays,
gently
pulling
the
cables
farther
into
the
server
as
you
do
so,
until
the
tape
drive
assembly
stops.
11.
Push
the
tray
handle
to
the
closed
(locked)
position.
12.
Remove
the
backing
from
the
hook-and-loop
fastener
on
the
SCSI
terminator.
Attach
the
terminator
to
the
top
of
the
CD/DVD
drive
bay
as
shown
in
the
following
illustration.
SCSI terminator
13.
Connect
the
tape
drive
signal
cable
connector
and
power
cable
connector
to
the
system
board
(See
“System-board
internal
cable
connectors”
on
page
19
for
the
location
of
the
connectors).
14.
Route
the
SCSI
signal
cable
under
the
SAS
cable,
through
the
slot
in
the
side
of
the
air
baffle
and
connect
it
to
the
SCSI
adapter.
The
following
illustration
shows
the
routing
of
the
signal
cable.
Important:
Make
sure
to
route
the
cables
so
that
you
do
not
obstruct
access
to
the
fan
connectors.
46
System
x3655
Type
7985:
User’s
Guide