Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 36
Connecting the Printer to Your PC, Connecting the Printer to a PC Through the USB Device Port - drivers
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Chapter 2 - Connecting the Printer Connecting the Printer to Your PC You can easily connect the PD41 or PD42 commercial printer to your PC using one of these ports: • USB device port • RS-232 serial interface port • IEEE 1284 communications port (optional) Note: You cannot use the USB device port and IEEE 1284 port at the same time. To select the active interface, go to Setup mode > COM: > Interface. Connecting the Printer to a PC Through the USB Device Port Intermec recommends that you only connect one printer to each PC, either directly, or through a hub. To connect the printer to a PC through the USB device port, you need: • USB Type B to USB Type A cable • Intermec InterDriver® software The USB cable you need is included in the shipping box with the printer. The InterDriver printer driver is available on the PrinterCompanion CD that ships with the printer. To make sure you have the latest version of InterDriver, you may want to go to the downloads page for the printer on www.intermec.com. To connect the printer to a PC through the USB port 1 Download and install the InterDriver software on your PC. 2 Connect the USB cable to the Type B connector on the back of the printer and connect the other end to your PC. You do not need to set up any parameters for USB communications. Connecting the Printer to a PC Through the Serial Port The serial communication parameters control the communication between the printer and the connected PC on the serial port, referred to as "uart1:" on the printer. 22 PD41 and PD42 Commercial Printer User's Manual