Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 82
Possible PD42 Printer Error Icons and Messages continued
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Chapter 4 - Troubleshooting and Maintaining the Printer Possible PD42 Printer Error Icons and Messages (continued) Error Icon ' Error Message Solution IP configuration error. The printer is trying to acquire an IP address from the network. Wait until the printer receives the IP address. Out of media. Load media in printer. For help, see "The printers can enter various states which indicate the current mode of operation." on page 9. Field out of label. You are attempting to print in an area that extends beyond the "print window." See the appropriate printer language command reference manual for help setting the media parameters. Ribbon empty. Try these solutions: • Load thermal transfer ribbon. For help, see "Loading Thermal Transfer Ribbon" on page 16. • On the PD42, change the Paper Type in Setup mode. Label not found. The printer does not find a label gap or black mark. • Go into Setup mode and verify that the label length parameter is correct. • Verify that the Media type settings are correct. Printhead hot. The printhead is overheated and needs to cool down. Wait for prining to resume automatically. Testfeed not done. Press Testfeed ( ). Test Cutter not found. A cut command has been sent to the printer, but the printer cannot find the cutter. Make sure the cutter is installed properly. 68 PD41 and PD42 Commercial Printer User's Manual