Intermec PD41 PD41 and PD42 Commercial Printer User's Manual - Page 44
To con the printer to use WEP authentication - default admin password
View all Intermec PD41 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Chapter 2 - Connecting the Printer To configure the printer to use WEP authentication 1 Send the following commands to login as an admin and set the SSID: .x,su -p pass admin ws,SSID,xxxxx where xxxxx can be from 0 to 32 ASCII characters, not including the double quote. Note: The default password for logging in as an admin is "pass." If you have changed the password, you will need to use your password instead of "pass." 2 Send the following commands to configure the WEP keys. The following example sets WEP key 1 to 1234 and enables WEP key 1. ws,WEP1, 0x0001020304 ws,.WEP_KEY,1 3 Send the following command to activate the settings. ws,ACTIVE,1 To configure the printer to use WPA-PSK or WPA2-PSK mode 1 Send the following commands to login as an admin and set the SSID: .x,su -p pass admin ws,SSID,xxxxx where xxxxx can be from 0 to 32 alphanumeric characters 2 Send one of the following commands to turn on WPA or WPA2 authentication. Send the WPA-PSK or WPA2-PSK command to set a pre-shared key: ws,WPA,ON ws,WPA2,ON ws,WPA_PSK, xxxxxxxxxx where xxxxxxxxxx is a value between 8 and 64 characters. 3 Send the following command to activate the settings: ws,ACTIVE,1 30 PD41 and PD42 Commercial Printer User's Manual