JVC DLA-HX1U Instruction Manual - Page 38
“Position” menu, 5 “Aspect ratio” menu, 6 “Decoder” menu, 8 “Logo” menu
View all JVC DLA-HX1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
Adjustments and Settings Using Menus When there is no image signal inputted Adjustment item (press ᮡ / ᮢ) Adjustment content (press ᮤ / ᮣ) "Position" Adjusts the position of the image and menu display. [ Press the [ENTER] button to enter the "Position" menu 4. "Sync level" (When PC input is selected) Although the inputted image signal is adjusted so that synchronization occurs automatically, this changes by changing this setup. Setting can be made by selecting "Low" (weaker), "Std" (factory set) or "High" (stronger). Values : "Low", "Std", "High" {"Std"} 4 "Position" menu You can adjust the menu display position. Press the cursors to set the horizontal/vertical position of the menu display. Set Value : "Menu pos." : ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ { } "Horiz. disp. pos." : Varies with signals. "Vert. disp. pos." : Varies with signals. "Horiz. DIST pos." : -8 ~ +7 {0} 5 "Aspect ratio" menu Press the cursor to set the aspect ratio of image. (☞ page 41, 42) Setting value : "4:3", "16:9", "Zoom" * {varies with signals} * When creating a 16:9 image with black bars above and below the screen from the signal with original aspect ratio of 4:3, the image will be enlarged to full screen on the panel if "Aspect ratio" is set to "Zoom". 6 "Decoder" menu Press the cursor buttons to choose the "Decoder" of the image signals. Normally, "AUTO" is selected. When "AUTO" does not function or when there is error, select the appropriate color system according to the software player. Values : "AUTO", "NTSC", "NTSC4.43", "PAL", "SECAM" {"AUTO"} 7 "Resize" menu Press the cursor to resize. (☞ page 43, 44) Setting value "1:1" "Panel" "Aspect" "Zoom" : "1:1", "Panel", "Aspect", "Zoom" {varies with signals} : The image is displayed at the inputted resolution. : The picture image projected is virtually enlarged to the full screen size if the inputted resolution is smaller than (1400 pixels x 788 pixels). : While maintaining the original aspect ratio, the video image projected is virtually enlarged until either the horizontal or vertical side reaches the full size (1400 pixels x 788 pixels). : The picture image projected is virtually enlarged to the full screen size if the 16:9 image is created with black bars above and below the screen from the signal with original aspect ratio of 4:3. 8 "Logo" menu Adjustment item (press ᮡ / ᮢ) Adjustment content (press ᮤ / ᮣ) "Logo disp." Sets whether to indicate the user set logo (captured image: "Logo disp.") when the projector starts up. {"ON"} "Logo pos." Sets the position of the user set logo (captured image: "Logo disp.") when the projector starts-up. Re-setting can be performed only when the logo has been eliminated. Set value : "Logo pos." : ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ { } "Back color" "Logo delete" "Capture menu" Selects the background color of the user set picture (captured image: "Logo disp."). {"Black"} Re- setting can be performed only when the logo has been eliminated. Deletes the user set logo (captured image: "Logo disp."). Deletion takes a few seconds. [ Press the [ENTER] button to delete. You can project a picture from the video player or PC and capture it to use as your logo. The captured picture can be displayed as a logo display when the projector starts up. [ Press the [ENTER] button to enter the "Capture menu" 9. 9 "Capture menu" Adjustment item (press ᮡ / ᮢ) Adjustment content (press ᮤ / ᮣ) "Menu pos." Adjusts the display position of the capture menu. Set value : "Menu pos." : ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ { } "Horiz. move" "Vert. move" "Horiz. size" "Vert. size" "Capture start" The position of the picture that you want to capture can be moved left or right with the cursor buttons The position of the picture that you want to capture can be moved up or down with the cursor buttons The width of the picture that you want to capture can be set by the cursor buttons The height of the picture that you want to capture can be set by the cursor buttons After setting all the items of the capture menu, image capture starts. ❈ Note that images already inputted will be deleted. [ Press the [ENTER] button to start. 38