JVC DLA-HX1U Instruction Manual - Page 49

Replacing the Lamp Resetting the lamp time After installing a new lamp, reset the lamp time counter inside the projector when this is done. A new count will start. If the display of the accumulated lamp time has reached 2000 hours, the projector will not work (lamp does not light up) unless the lamp time is reset. 1. Insert the power cord into the wall outlet • The [STAND BY] indicator lights up when the main power is inputted. Press for 2 seconds PC VIDEO OPERATE W V-KEYSTONE H-KEYSTONE SCREEN DIGITAL ZOOM S FREEZE VOLUME FOCUS QUICK ALIGN. 2. Press the [EXIT], [HIDE], [PRESET] buttons on the remote control sequentially, then press VOL ª for 2 seconds or more • The [STAND BY] and [OPERATE] indicators alternately blink about every approx. 3 seconds. After blinking stops, lamp time resets and the projector returns to the stand-by state ([STAND BY] indicator lights up). EXIT HIDE Press as per normal PRESET MENU EXIT ENTER PRESET HIDE EXIT HIDE PRESET VOL( ) Press for 2 seconds or more To ensure the lamp time has been reset The lamp time can be checked via the "Lamp time" item in the "Information" menu. (☞ page 32, 33, 34, 40) Caution for reset work Reset the lamp time only when you have replaced the lamp. Never reset it while the lamp is still in use, otherwise the approximate standard for gauging replacement time may be inaccurate, lamp performance may suffer and lamp blow-out may also occur. 49