JVC GY-DV300U 42 pg. users guide on the KA-DV300 Network Pack (PDF, 916KB) - Page 29

NETWORK PACK SETUP Controlling GY-DU300/KA-DU300 via a LAN card With the Network Pack, GY-DV300/KA-DV300 can be controlled via LAN. It is also possible to playback video and audio from KA-DV300 on your PC in the STREAMCAPTURE screen in realtime (live display) as well as save data to files. However, note that video and audio from KA-DV300 can be played back only on one PC at a time. Peer-to-peer connection that directly connects the unit with a PC is explained here. GY-DV300 CH-1 CH-2 AUDIO LEVEL ND FILTER ON OFF IRIS FOCUS AUTO MANU PUSH AUTO PROFESSINAL DV CAMCORDER GY-DV300 OPEN PC 10 BASE-T cross cable Set the LAN card driver by following the instructions on manual provided by the card manufacturer. KA-DV300 Socket Com: EA2900-117 (USA) EA2903-162 (Europe) EA2906-194 (Asia) (CF memory card adapter (PCMCIA TYPE I/II specifications)(sold separately) is required for inserting this card.) 1. Turn your PC and GY-DV300 power off. 2. Insert the PCMCIA LAN card to specify into KA-DV300. 3. Connect the unit and PC using a 10 BASE-T cross cable. 4. Turn the PC and GY-DV300 power on. 5. Insert a recordable DV cassette tape. 6. PC settings ● Set the LAN card driver according to the manual provided by the card manufacturer. ● Network settings q Set the following items in the TCP IP properties: IP address: 192.168.100.105 Subnet mask: 255.255.255.000 w Setting the proxy server. • Set the proxy server using the "LAN SETTINGS" of Windows. • When using peer-to-peer communication that directly connects the PC and KA-DV300, deselect the "Use a proxy server" checkbox. • When the "Use a proxy server" setting must be enabled due to a LAN environment (in-company LAN, etc.), click "Advanced..." and input the IP address of GY-DV300 in "Exceptions" of the "Use a proxy server" setting. ( "About proxy servers," Page 41) 7. Launch the browser on your PC and enter 192.168.100.101 in the address bar and press ENTER. ● A confirmation window for user ID and password appears. 8. Input the user ID and password. q For the user ID, input "jvc" (factory setting). For the password, input "ka-dv300" (factory setting) or the name set in the NETWORK SET [2/2] menu screen. ( page 10) w Check to make sure the inputted user ID and password are correct and click the OK icon. (Check "Save password" so that the password does not need to be inputted for future accesses.) 9. If the user ID and password are correct, the NETWORK PACK SETUP screen appears on the PC monitor. ● GY-DV300/KA-DV300 settings and operations can be con- trolled using the NETWORK PACK SETUP. ( page 30) Caution When setting the NETWORK PACK SETUP screen (CAMERA CONTROL, NETWORK SETUP, PORT SETUP or ENCODE PARAMETERS) and the same menu screen is displayed on the LCD screen or viewfinder of GY-DV300, values set in the NETWORK PACK SETUP screen will not appear on menu screen of the LCD screen or the viewfinder of GY-DV300. The values set in the NETWORK PACK SETUP screen will appear after the menu screen of GY-DV300 is closed once and reopened. Enter Network Password Please enter tour authentication information. Resource User name: secured ?X OK Cancel Password: 29