JVC GY-DV300U 42 pg. users guide on the KA-DV300 Network Pack (PDF, 916KB) - Page 30

NETWORK PACK SETUP CAMERA CONTROL screen When the correct user ID and password are accepted, the following Streamcorder screen appears. Camera adjustments of GY-DV300 can be made in the CAMERA CONTROL screen. Screen selection Clicking will display the selected screen. JVC NETWORK PACK KA-DV300 NETWORK PACK SETUP NETWORK SETUP PORT SETUP ENCODE PARAMETERS CAMERA CONTROL STREAM CAPTURE VTR CONTROL CAMERA CONTROL FULL AUTO BARS WHITE BAL IRIS GAIN SHUTTER ZOOM OK ON ON FAW AUTO MANUAL Lolux ALC STEP 0dB STEP OFF WIDE TELPHOTO 0 STOP CANCEL Setting range ● When setting AUTO to ON, items other than BARS will not be available. ● When setting BARS to ON, all other items will not be available. ● When setting GAIN to ALC, IRIS and SHUTTER will not be available. Setting Select the setting from the pull-down menu. Adjustment mode selection Check the desired adjustment mode. Clicking the OK icon will confirm the inputted setting. Item AUTO BARS WHITE BAL Adjustment mode Setting/description ON: Auto mode on. Items other than BARS cannot be set. OFF: Auto mode off ON: Color bar signals are outputted. Other items cannot be set. OFF: Color bar signals are not outputted. FAW: Full white balance mode PRESET: White balance will be in the preset state. (3200K) MEMORY 1 ~ 3: White balance setting stored in the GY-DV300 memory will be used. IRIS GAIN SHUTTER ZOOM AUTO MANUAL Lolux ALC STEP 0dB STEP OFF WIDE TELEPHOTE STOP Auto iris mode. Iris will be adjusted within the following range: [-3, -2, -1, 0, 1, 2, 3,] Manual iris mode. Iris will be adjusted within the following range: [CLOSE, F16, F11, F8, F5.6, F4, F2.8, F2, F1.6] Lolux mode ALC (Auto Level Control) mode. IRIS and SHUTTER cannot be set Gain can be set within the following range. (1 dB steps) [-3dB ~ 0dB ~ 18dB] 0dB Shutter speed can be set within the following range: [1/100 (1/120), 1/250, 1/500, 1/1000, 1/2000] Shutter speed will be 1/60 (1/50). Zoom is set to WIDE. Setting can be made within the following range: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10] Zoom is set to TELEPHOTE. Setting can be made within the following range: [0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10] Use this setting when not using zoom. ( ): for E model ( ): for E model 30