Lenovo ThinkCentre M50e Hardware Maintenance Manual - Page 138
appropriate
View all Lenovo ThinkCentre M50e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
5. For all drives except the hard disk drive, push in on the metal tab that secures the drive being removed. The hard disk drive tray pivots out toward the front of the computer for removal of the hard disk drive. See the following illustrations. For the hard disk drive, see the illustration below. 6. Slide the drive out the front of the computer. 7. Make sure the drive that you are installing is set correctly as either a master or a slave device. Jumper the new drive the same as the drive being replaced. Note: If you are installing a serial ATA drive, no master/slave jumpering is necessary. Refer to the documentation that comes with your drive for master/slave jumper information. 8. Slide the drive into the appropriate bay. 9. Reconnect the signal and power cables to the new drive. 132 Hardware Maintenance Manual