Lenovo ThinkCentre M50e Hardware Maintenance Manual - Page 68
FRU/Action
View all Lenovo ThinkCentre M50e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Diagnostic Error Code 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error 001-024-XXX System Addressing test failure 001-025-XXX System Checksum Value error 001-026-XXX System FLASH data error 62 Hardware Maintenance Manual FRU/Action 1. Flash the system. See "Flash update procedures" on page 214 2. System board Information only Re-start the test, if necessary 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, "Using the Setup Utility," on page 55 2. Re-run test 3. Replace the component that is called out in warning statement 4. Replace the component under test 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, "Using the Setup Utility," on page 55 2. Flash the system and retest. See "Flash update procedures" on page 214 3. Go to "Undetermined problems" on page 90 1. Go to "Undetermined problems" on page 90 2. Flash the system and re-test 3. Replace component under function test 1. Flash the system. See "Flash update procedures" on page 214 2. System board 1. Flash the system. See "Flash update procedures" on page 214 2. System board No action System board System board System board 1. Flash the system. See "Flash update procedures" on page 214 2. System board 1. Flash the system. See "Flash update procedures" on page 214 2. System board