Lenovo ThinkPad 130 ThinkPad i Series 1200/1300, TP 130 - User's Reference - Page 78
BIOS Utility. See Startup Configuration
View all Lenovo ThinkPad 130 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Attaching an external monitor If no external monitor is attached to the computer and the display output location is set to External Display, the output is displayed on the LCD. Both: The computer output is displayed on both the LCD and the external monitor. You can also change the display output location using the Fn key function. Press and hold the Fn key; then press the F7 key. The output is displayed sequentially as follows: Important Do not disconnect the external monitor while the computer is in hibernation mode. If no external monitor is attached when the computer resumes, the LCD remains blank and output is not displayed. This restriction does not depend on the resolution value. The DOS Screen Image on the LCD If you use a DOS application that supports only VGA mode (640x480 resolution) with your computer, the screen image might appear smaller than the display size, as shown: This is to maintain compatibility with DOS applications. To expand the screen image to the same size as the actual screen, you can use the screen expansion function. You can expand the screen image in DOS mode by enabling Screen Expansion in the Startup Configuration menu of the BIOS Utility. (See "Startup Configuration" on page 21.) The screen image in Windows can be expanded by following these steps: 1. Click Start. 64 ThinkPad i Series 1200/1300 User's Reference