Lenovo ThinkPad X230i (English) User Guide - Page 114
Detaching the ThinkPad UltraBase Series 3, UltraBase Series 3.
View all Lenovo ThinkPad X230i manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
4. Turn the system lock key to the locked position (horizontal). The computer is docked to the ThinkPad UltraBase Series 3. Note: You can turn the key clockwise to lock it. Then, keep the key in a safe place. Do not lose this key; otherwise, you will be unable to detach the computer from the ThinkPad UltraBase Series 3. Detaching the ThinkPad UltraBase Series 3 Attention: Do not detach your computer from the ThinkPad UltraBase Series 3 while the docking station indicator is blinking or on. Wait until the docking station indicator turns off. Detaching while the indicator is blinking or on causes the system to beep, and the computer might halt. You can hot detach or warm detach the computer from the ThinkPad UltraBase Series 3. Hot detachment is detaching the computer from the ThinkPad UltraBase Series 3 while the computer is in operating mode; warm detachment is detaching the computer from the ThinkPad UltraBase Series 3 while the computer is in sleep mode. Before performing a hot or warm detachment operation, ensure that: • The devices connected to USB, serial, and parallel connectors are not in use. • The connection to the Ethernet port has ended. • The battery is fully charged. Performing a hot detachment operation To perform a hot detachment operation, do the following: 1. Click Start, and then press the right arrow key and select Unlock. 2. When the docking station indicator is off, detach the computer following the instructions in "Detaching the computer" on page 99. Note: Detaching while the computer is operating without performing the procedure above may cause the system to malfunction or hang. Performing a warm detachment operation To perform a warm detachment operation, do the following: • Press the eject request button of the ThinkPad UltraBase Series 3. The system will then resume with an OK message. 98 User Guide