Lenovo ThinkPad X230i (English) User Guide - Page 149

: Machine Type and Serial Number are invalid., 2111: Read error on HDD1 Ultrabay HDD

Page 149 highlights

• Message: 0187: EAIA data access error Solution: The access to EEPROM is failed. Have the computer serviced. • Message: 0188: Invalid RFID Serialization Information Area Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number needs to be reinstalled. Have the computer serviced. • Message: 0189: Invalid RFID configuration information area Solution: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace, and the UUID needs to be reinstalled. Have the computer serviced. • Message: 0190: Critical low-battery error Solution: The computer turned off, because the battery is low. Connect the ac power adapter to the computer and charge the battery, or replace the battery with a fully charged one. • Message: 0191: System Security - Invalid remote change requested Solution: The system configuration change has failed. Confirm the operation and try again. To clear the error, enter ThinkPad Setup. • Message: 0199: System Security - Security password retry count exceeded. Solution: This message is displayed if you enter a wrong supervisor password more than three times. Confirm the supervisor password and try again. To clear the error, enter ThinkPad Setup. • Message: 1802: Unauthorized network card is plugged in - Power off and remove the network card. Solution: The mini PCI Express network card is not supported on this computer. Remove it. • Message: 1820: More than one external fingerprint readers are attached. Solution: Power off and remove all but the reader that you set up within your main operating system. • Message: 2000: ThinkVantage Active Protection sensor diagnostics failed. Solution: ThinkVantage Active Protection sensor is not working correctly. Have the computer serviced. • Message: 2100: Detection error on HDD0 (Main HDD) Solution: The hard disk is not working. Have the hard disk serviced. • Message: 2101: Detection error on HDD1 (Ultrabay HDD) Solution: The hard disk is not working. Have the hard disk serviced. • Message: 2102: Detection error on HDD2 (Mini SATA) Solution: The Mini SATA device is not working. Have the Mini SATA device serviced. • Message: 2110: Read error on HDD0 (Main HDD) Solution: The hard disk is not working. Have the hard disk serviced. • Message: 2111: Read error on HDD1 (Ultrabay HDD) Solution: The hard disk is not working. Have the hard disk serviced. • Message: 2112: Read error on HDD2 (Mini SATA) Solution: The Mini SATA device is not working. Have the Mini SATA device serviced. • Message: 2200: Machine Type and Serial Number are invalid. Solution: Machine Type and Serial Number are invalid. Have the computer serviced. • Message: 2201: Machine UUID is invalid. Solution: Machine UUID is invalid. Have the computer serviced. • Message: Fan error Solution: Cooling fan has failed. Shut down the computer immediately and have the computer serviced. • Message: Thermal sensing error Chapter 10. Troubleshooting computer problems 133

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182

Message
: 0187: EAIA data access error
Solution
: The access to EEPROM is failed. Have the computer serviced.
Message
: 0188: Invalid RFID Serialization Information Area
Solution
: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced,
and the box serial number needs to be reinstalled. Have the computer serviced.
Message
: 0189: Invalid RFID configuration information area
Solution
: The EEPROM checksum is not correct (block # 4 and 5). The system board should be replace,
and the UUID needs to be reinstalled. Have the computer serviced.
Message
: 0190: Critical low-battery error
Solution
: The computer turned off, because the battery is low. Connect the ac power adapter to the
computer and charge the battery, or replace the battery with a fully charged one.
Message
: 0191: System Security - Invalid remote change requested
Solution
: The system configuration change has failed. Confirm the operation and try again. To clear the
error, enter ThinkPad Setup.
Message
: 0199: System Security - Security password retry count exceeded.
Solution
: This message is displayed if you enter a wrong supervisor password more than three times.
Confirm the supervisor password and try again. To clear the error, enter ThinkPad Setup.
Message
: 1802: Unauthorized network card is plugged in - Power off and remove the network card.
Solution
: The mini PCI Express network card is not supported on this computer. Remove it.
Message
: 1820: More than one external fingerprint readers are attached.
Solution
: Power off and remove all but the reader that you set up within your main operating system.
Message
: 2000: ThinkVantage Active Protection sensor diagnostics failed.
Solution
: ThinkVantage Active Protection sensor is not working correctly. Have the computer serviced.
Message
: 2100: Detection error on HDD0 (Main HDD)
Solution
: The hard disk is not working. Have the hard disk serviced.
Message
: 2101: Detection error on HDD1 (Ultrabay HDD)
Solution
: The hard disk is not working. Have the hard disk serviced.
Message
: 2102: Detection error on HDD2 (Mini SATA)
Solution
: The Mini SATA device is not working. Have the Mini SATA device serviced.
Message
: 2110: Read error on HDD0 (Main HDD)
Solution
: The hard disk is not working. Have the hard disk serviced.
Message
: 2111: Read error on HDD1 (Ultrabay HDD)
Solution
: The hard disk is not working. Have the hard disk serviced.
Message
: 2112: Read error on HDD2 (Mini SATA)
Solution
: The Mini SATA device is not working. Have the Mini SATA device serviced.
Message
: 2200: Machine Type and Serial Number are invalid.
Solution
: Machine Type and Serial Number are invalid. Have the computer serviced.
Message
: 2201: Machine UUID is invalid.
Solution
: Machine UUID is invalid. Have the computer serviced.
Message
: Fan error
Solution
: Cooling fan has failed. Shut down the computer immediately and have the computer serviced.
Message
: Thermal sensing error
Chapter 10
.
Troubleshooting computer problems
133